- 1
- Piece/Pieces
- 300000.00 - 1200000.00 INR
- 300000-1200000 INR
- Other
- Stainless Steel
- Yes
- Automatic
- PLC Control
- Electric
- Other
- Electric
- As per customer requirement Watt (w)
- 10-10000 Kilogram(Kg)
- 1 year warranty
SR. NO. | DESCRIPTION | SPECIFICATIONS | RE MARKS |
01 | GENERAL | ||
A | SERVICE | Drying of wet powders / granules | ÃÂÃÂ |
B | DUTY | Batch type | ÃÂÃÂ |
C | MOUNTING | Vertical | ÃÂÃÂ |
D | LOCATION | Inside the room | ÃÂÃÂ |
E | MODEL | cGMP | ÃÂÃÂ |
G | GROSS VOLUME OF CONTAINER | 200 Ltrs. | ÃÂÃÂ |
02 | OPERATING & DESIGN CONDITIONS | ||
A | MATERIALS | Wet granules / Powder | ÃÂÃÂ |
B | BULK DENSITY | 0.6 gms /cc | To be confirm by client |
C | OPERATING TEMPERATURE | 20-90 deg. C | ÃÂÃÂ |
D | OPERATING PRESSURE | FV / 1.0 Kg/cm2 | ÃÂÃÂ |
E | HEATING MEDIA | Steam | ÃÂÃÂ |
03 | DESCRIPTION & MOC | ||
A | PRODUCT CONTAINER | 2.0 MM THICK, SS 316 with S.S 316 dutch hollender sieve and perforated plate for proper air distribution. | ÃÂÃÂ |
B | CONTAINER TROLLEY | Made out ofSS 304 pipes and elbowsÃÂÃÂ 3 MM THK | ÃÂÃÂ |
ÃÂÃÂ
C | RETARDING CHAMBER CUM FINGER BAG CHAMBER | Manufactured from 2.5 MM THK S.S. 316 Sheets. It contains finger bag shaped PP finger bags , explosion chamber along with the explosion flap at the back side to suppress the explosion pressure within the safety limits. | ÃÂÃÂ |
D | TOP DISH | Manufactured out of SS 304 sheetsÃÂÃÂ 4 MM THICK | ÃÂÃÂ |
E | BOTTOM SUCTION SHOE | Manufactured out of SS 304 sheetsÃÂÃÂ 3 MM THK . It has a sloping bottom with a drain plug. It also consists of a lifting chamber. | ÃÂÃÂ |
F | HEATING CUM FILTRATION CHAMBER | Manufactured out of SS 304ÃÂÃÂ 2.5 MM THK provides them passage for inlet air. Prefilter in Aluminum construction complete with non woven polyester media sandwiched between 2 layers of HDPE. Polyester media sandwiched between 2 having efficiency of 99 % down to 5 microns. | ÃÂÃÂ |
G | I.D. FAN ASSEMBLY | Centrifugal blower made out of SS 304 housed in SS 304 casing 5 mm THK | ÃÂÃÂ |
H | HEAT EXCHANGER COIL | Finned Tube heat exchanger unit made out ofÃÂÃÂ SS 304 . Approx. steam consumption 60-75 Kgs/Hr. | ÃÂÃÂ |
I | SEALING GASKETS | All sealing gaskets shall be of food grade neoprene rubber. | ÃÂÃÂ |
ÃÂÃÂ
04 | DRIVE MECHANISM & CONTROL PANEL | ||
A | POWER REQUIREMENT | 3Ph/415VAC/50 Hz/AC | ÃÂÃÂ |
B | DRIVE MOTOR HP | 10.0 HP/2800 RPM/ FLANGE MOUNTED / non FLP | ÃÂÃÂ |
C | BLOWER MOUNTING | On top of the dryer unit | ÃÂÃÂ |
D | CONTAINER LIFTING MECHANISM | By means of pneumatic cylinder. | ÃÂÃÂ |
E | FINGER BAG SHAKING MECHANISM | By means of cyclic timer and pneumatic cylinder. | ÃÂÃÂ |
F | EARTHING DEVICE | Standard earthing device shall be provided with the unit to bypass the static charge generated during operation. | ÃÂÃÂ |
F | CONTROL PANEL | SS 304 non flp operating panel with mild steel powder coated power panel | ÃÂÃÂ |
05 | SURFACE FINISH | ÃÂÃÂ | ÃÂÃÂ |
A | Product Contact Parts | 220 grit mirror finish | ÃÂÃÂ |
B | Product non contact parts | 180 Grit Matt finish | ÃÂÃÂ |
C | Mild Steel Surfaces | ÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂ÷ÃÂàÃÂàÃÂàÃÂàÃÂàÃÂàÃÂàÃÂàCoat of Zinc phosphate epoxy primer ÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂ÷ÃÂàÃÂàÃÂàÃÂàÃÂàÃÂàÃÂàÃÂàFinal Coat of light gray acrylic polyurethane enamel paint ÃÂà| If applicable |
- Telegraphic Transfer (T/T), Letter of Credit at Sight (Sight L/C), Letter of Credit (L/C), Cheque, Cash in Advance (CID), Cash Advance (CA), Cash Against Delivery (CAD)
- 30 Per Month
- 8-10 Week
- Yes
- Contact us for information regarding our sample policy
- Wooden Packing Only
- Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
- All India
- CE & ISO Certified
Plot No. 2802, ROAD NO - 4 E, Near Ramol Char Rasta, Phase-IV, GIDC, Vatva, Ahmedabad, Gujarat, 380445, India
Phone :+918045478418