Lube Oil Blending Plant

Technical specification:-

• Custom designed Internal Limped coiled for Heating Agitator Stirrer.
• Size :0 MtsI.D. x 0 Mts Tan to Tan Shell of sides 8 mm thickness and Bottom of 10 mm thickness with Dish-end bottom welded. Total Height Mts as per capacity.
• Internal 2” or3” Limped coil spiral type in the vessel with inlets & outlets or Heating Elements ( Boiler not available) for Heating.
• Vessel Support:Designed for Four support Brackets for mezzanine type installation.
• Material of construction: Carbon Steel
• Finish: Internal “Mill finish, welds ground smooth and flush, scales removed.
• External “ Mill finish, welds with flux and spatter removed and wire brushed.
• Painting: All external carbon steel surfaces primer painted and finished with top coat of hammer-tone machinery enamel
• Discharge flange type: discharge valve with 3” or 2” full port opening with piping to pumping system. Valve could be hand operated. (ball valve / gate valve)

Agitator With Motor:-

Agitator:Blades to provide efficient movement of product andtransfer of heat.

This is coupled to a Reduction WormGear box (ELECON / RADICON BRAND) to give the sweep blade speed, therequired rpm.

Motor:ABB / HINDUSTAN / SIEMENS of the required capacities will becoupled with the Worm Gear Box ,Bearings, couplings, bushes, etc of standardquality and replaceable.

Feed Pumps “ Gear Pump with Electric Motor:-